Category: automotive > replacement parts > transmission & drive train > clutches & parts > complete clutch sets
| Brand: Exedy
| Merchant: Advance Auto Parts For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing. All of our multi plate clutches come with a lightweight chromoly steel flywheel, and the famous purple anodized forged aluminum clutch cover. Depending on the application, both strap drive and lug drive models are available. All have T5001 cerametallic friction materials for extreme heat resistance. The multi plate clutches are rated up to 800+ foot pounds of torque at the flywheel. And come with spring damper or solid discs depending on the application. All of the multi plate clutches come with a lightweight chromoly steel flywheel, and a purple anodized forged aluminum clutch cover and multiple ceramic friction discs. After installation of the cerametallic clutch please note due to high performance t5000 friction material being used in your disc you may encounter slight clutch shudder as with any cerametallic clutch system there will be some compromise of start up driveability as compared to a stock clutch (chatter on light throttle, at low rpm start ups.) These characteristics are generally acceptable in modified performance cars. Drivers who choose cerametallic clutches must be aware of this. Please advise the driver of the vehicle that Installing a sports and performance clutch to suit various vehicles, can transfer noises from the engine to the gearbox. This may also cause gearbox rattle on some vehicles. These transmitted noises will in no way effect or harm the performance of the clutch or vehicle and is fully accepted in the performance industry where engine / clutch modifications have been carried out. EXEDY Corporation is a powertrain specialist and original equipment supplier to the automotive industry world wide. EXEDY's products range: wet & dry friction material, torque converters, complete transmission systems for highway, off-highway and industrial applications. EXEDY is also the leading manufacturer of racing clutches in Japan and supply all six factory vehicle manufacturer's race teams. Multi-plate Clutch Set, stage 4. Designed for limited street driving and road circuit cars. Designed for high-powered applications only: such as drag, road, and rally racing. Intended for engines that are capable of producing up to 480HP. Flywheel is made from billet chrome-moly steel. The purple anodized cover is made from forged aluminum. Disc OD=200mm; clamp load 2205 lbs.; pull type clutch. Product Features:High friction coefficient, low wear, and a special heat resistant material (T5001) has been developed enabling clutch size to be reduced and increased durability to be achieved.Durability is improved with the use of a stronger, smaller multiple damper disc, specifically redesigned for the Multiplate clutchLower level of inertia is achieved over the genuine fitment clutch which improves shift response for faster gear changes particularly for racing applications.The higher clamp load and cerametallic friction facings provide many times the holding torque of the OEM clutch and generally higher than other single plate clutches.The aluminum purple anodized cover is stiffer than the stamped cover, allowing a higher lever ratio to maintain the pedal efforts at a reasonable level.Additional feature of the pressure plate is a series of turbine-like, air flow enhancing vanes that keep the clutch cooler under extreme operating conditions to improve wear life.