Cell Buckle Universal Electronic Device, Cell Phone and MP3 Player Mount

Cell Buckle Universal Electronic Device, Cell Phone and MP3 Player Mount
$19.99

Shop Now

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Cell Buckle | Merchant: J&P Cycles

Cell Buckle Universal Electronic Device, Cell Phone and MP3 Player Mount
Securely attach your device to your handle bars in a matter of seconds A durable locking slider moves up and down to adjust to the size of a mobile phone, GPS, iPod, MP3 player or other handheld device Adjustable slider fits devices up to 2.9"" wide and 0.8"" thick Kit comes with two mounts, one that fits 7/8"" to 1"" diameter tubing and the other that fits 1-1/4"" to 1-1/2"" diameter tubing such as handle bars, highway bars, and other tubing Simplistic and well thought out design allows you to use this mount in every aspect of your daily routine Use it in the shop, in your car or boat, at the gym, around the house, at the beach, or wherever your next adventure takes you Invented by a biker and backed by a manufacture's life-time warranty


Similar Products:


RAM Mounts Stem Mount Finger Grip Cell Phone Kit (Color: Black)

RAM Mounts Stem Mount Finger Grip Cell Phone Kit (Color: Black)

$58.49
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mounts | Merchant: Cycle Gear RAM Mounts Stem Mount Finger Grip Cellphone Kit The RAM-B-176-UN4 consists of a double socket arm, hardware for mounting to your motorcycle stem, and finger grip cell phone holder. Designed into the mount is a 1 diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm this with a twist of the arm knob, allows you can move the mount to your optimum viewing position. The included finger grip cradle is designed to hold a large amount of cell phones and electronic devices. The holder comes with 3 sets of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. This mount is designed to hold the following devices: Cell Phones (check measurements below for dimensions) 2-Way Radios GPS Devices Height Dimensions: Minimum with Top and Bottom Plates: 5.25 Maximum with Top and Bottom Plates: 6.0 Top and bottom plates can be removed for larger devices Spine Plate Dimensions: 2.5W x 5.0H Socket Arm: 3 Long Using Short Arm Side Clamps: Maximum Depth: 0.75 Minimum Width: 1.25 Maximum Width: 3.0 Using Medium Arm Side Clamps: Maximum Depth: 1.25 Minimum Width: 1.5 Maximum Width: 3.5 Using Long Arm Side Clamps: Maximum Depth: 1.6 Minimum Width: 2.25 Maximum Width: 3.5 The fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or 0.5 1.10 at the following intervals: Metric Standard 12mm 0.5 14mm 0.55 16mm 0.63 18mm 0.71 20mm 0.79 28mm 1.10 Material: Powder Coated Marine Grade Aluminum Ball Size: 1 Rubber Ball B Size




Universal Inkjet Premium Compatible Chip for Samsung MLT-D203E

Universal Inkjet Premium Compatible Chip for Samsung MLT-D203E

$23.14
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal Inkjet | Merchant: Walmart US Universal Inkjet Premium Compatible Chip for Samsung MLT-D203E: Compatible with multiple systemsMeets or exceeds OEM standardsEasy to use




Universal Inkjet Premium Compatible Chip for Samsung CLP-500/CLP-550

Universal Inkjet Premium Compatible Chip for Samsung CLP-500/CLP-550

$4.61
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal Inkjet | Merchant: Walmart US Universal Inkjet Premium Compatible Chip for Samsung CLP-500/CLP-550:Compatible with multiple systemsMeets or exceeds OEM standardsEasy to use




Ram Mounts Brake/Clutch Reservoir U-Bolt Mount w/Universal X-Grip Phone Holder

Ram Mounts Brake/Clutch Reservoir U-Bolt Mount w/Universal X-Grip Phone Holder

$54.37
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Ram Mounts | Merchant: Rocky Mountain ATV The RAM Mounts Brake/Clutch Reservoir U-Bolt Mount w/Universal X-Grip Cell Phone Holder consists of a double socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5 to 1.25 in diameter and universal X-Grip cell phone holder. Designed into the mount is a 1 diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the cell phone holder to your optimum viewing position. The spring loaded X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. X-Grip Holder Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable X-Grip Holder Dimensions: Minimum Width = 0.875 (Devices at 0.875 must be a minimum of 4 in height to fit into holder) Maximum Width = 3.25 Depth = 0.875




Air Vent Car Mount Magnetic Universal Car Mount Holder

Air Vent Car Mount Magnetic Universal Car Mount Holder

$3.99
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles | Brand: Universal | Merchant: Wirelessoemshop Vent Car Mount, Air Vent Magnetic Universal Car Mount Holder (Black) for iPhone 6S/6, Galaxy S6/S6 Edge, LG G4, Apple iPhone 5S 5C 5 4S, Samsung Galaxy S5 S4, Nexus 5X, HTC M9 Compatible with most devices Compact and economical design Simple, effortless installation Mounts to any vehicle's air vent and promotes optimal/full view of your device Sturdy, cradle-less and attractive device holding system The Vent Car Mount is a sturdy, cradle-less, attractive device holding system focused on simplicity. Simply place the included slim, plate inside the case of your device and attach the tiny, magnetic clip to your car's air vent. The strong-powered magnet will ensure that your device is secure, while the cradle-less feature enables you to completely view your device without any distracting arms and holders. -Designed with Drivers in Mind Compatible with : Most devices and some popular compatible models are






RAM Mounts Universal Cell Phone Holder with Suction Mount 2016

RAM Mounts Universal Cell Phone Holder with Suction Mount 2016

$47.99
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Ram Mounts | Merchant: SummitOnline.com The RAM Universal Cell Phone Holder with Suction Mount is the perfect complement to the modern sleek interior of today's vehicles. The X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The mount consists of a 3.25 in twist lock suction cup base and a double socket system. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1 in diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm to allow for almost infinite adjustment and perfect viewing angles. Spring loaded X-Grip offers a perfect custom fit of your cell phone, Four leg design grips without obscuring screen, Suction cup will grip glass and non-porous plastic surfaces, Ball and socket allows almost infinite adjustment to get the perfect viewing angle, Accommodates 1 in rubber ball, Model Year: 2016, Product ID: 430135, Model Number: RAP-B-166-UN7, GTIN: 0793442934001




5.0W Hybrid Phone Case

5.0W Hybrid Phone Case

$6.88
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car cradles | Brand: Sky Devices | Merchant: BrandsMart USA UPC: 854546006114
Sky Devices SKY 5.0 W CASE 5.0W Hybrid Phone Case




Car Holder Suction Mount for iPhone 4 4G 4S or 3 3G 3S

Car Holder Suction Mount for iPhone 4 4G 4S or 3 3G 3S

$3.99
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal | Merchant: Wirelessoemshop Brand New and Easy to use for Apple iPhone. Easy repositioning or transfer between vehicles. People-oriented design. Adjustable goose neck design. Suction pad enables attachment of holder to a wide range of surfaces. Flexible arm allows fine tuning of positioning. Features: 100% Brand New and High Quality Innovative design Made for Apple iPhone 4 4G 4S or 3 3G 3S Easy repositioning or transfer between vehicles People-oriented design Adjustable goose neck design Durable, and Beautiful design Suction pad enables attachment of holder to a wide range of surfaces lexible arm allows fine tuning of positioning




RAM Mounts Universal X-Grip Cell Phone Cradle With Handlebar Mount

RAM Mounts Universal X-Grip Cell Phone Cradle With Handlebar Mount

$47.49
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mounts | Merchant: Chaparral Motorsports Consists of a zinc coated u-bolt base; double socket arm and universal X-Grip cradle. Included in this package is hardware that will accommodate rails from 1/2'' to 1 1/4'' in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The mount is designed with a RAM 1'' diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included composite rail adapter can narrow the rail to a minimum width of 1/2''. The included X-Grip cradle has a four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip cradle expands and contracts; allowing for a perfect custom fit of your cell phone. The X-Grip includes a device tether recommended for outdoor applicatioins. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Made from powder coated marine grade aluminum; marine grade stainless steel components and high strength composite Rustproof Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments 1'' Rubber ball ''B'' size Cradle Dimensions: Minimum Width: 1 7/8'' (Minimum Height: 4 1/4'') Maximum Width: 3 1/4'' (Minimum Height: 2 1/4'') Depth: 7/8'' U-Bolt Dimensions: 1/2'' to 1 1/4'' Lifetime manufacturer's warranty Weight 0.75 lbs. Made in the USA




RAM Mounts Universal Cell Phone Holder Kit (Color: Black)

RAM Mounts Universal Cell Phone Holder Kit (Color: Black)

$58.99
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mounts | Merchant: Cycle Gear RAM Mounts Universal Handlebar or Brake / Clutch Reservoir X-Grip Cell Phone Cradle Kit The RAM-B-174-UN7 consists of a double socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5 to 1.25 in diameter and universal X-Grip cell phone holder. Designed into the mount is a 1 diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm this with a twist of the arm knob, allows you can move the X-Grip mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts.The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. FITMENT: Apple iPhone 5 WITH OR WITHOUT CASE/SLEEVE Apple iPhone 4S WITH OR WITHOUT CASE/SLEEVE Apple iPhone 4 WITH OR WITHOUT CASE/SLEEVE Apple iPhone 3GS WITH OR WITHOUT CASE/SLEEVE Apple iPhone 3G WITH OR WITHOUT CASE/SLEEVE Apple iPhone WITH OR WITHOUT CASE/SLEEVE Apple iPod touch (All Models) WITH OR WITHOUT CASE/SLEEVE Apple iPod (G1-G5) The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width 0.875 (Devices at 0.875 must be a minimum of 4 in height to fit into holder) Maximum Width 3.25 Depth 0.875 Features: Rustproof High strength composite and stainless steel construction Spring loaded holder expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Lifetime warranty Material: High Strength Composite, Rubber Tips, Powder Coated Marine Grade Aluminum and Stainless Steel Construction Ball Size: 1 Rubber Ball B Size Note: To see if the RAM-B-174-UN7 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94 and a maximum of 1.58.




UNIVERSAL UNV08116 Phone Stand, Black,10-1/2in. Dx5-1/4in. H G1888139

UNIVERSAL UNV08116 Phone Stand, Black,10-1/2in. Dx5-1/4in. H G1888139

$19.68
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: Universal | Merchant: Walmart US Phone Stand, Plastic, Black, Length 10-1/2 In, Width 12-1/4 In, Height 5-1/4 In, Depth 10-1/2 In. FeaturesColor: BlackDepth: 10-1/2"Height: 5-1/4"Item: Phone StandLength: 10-1/2"Material: PlasticWidth: 12-1/4




RAM Mount X-Grip Apple Device Cradle (RAM-B-166-UN7U)

RAM Mount X-Grip Apple Device Cradle (RAM-B-166-UN7U)

$49.99
View Product

Category: electronics > cell phones & accessories > accessories > car accessories > car cradles & mounts > car mounts | Brand: RAM Mount | Merchant: Sonic Electronix General Features: X-Grip cradle for cell phones Suction cup twist lock base for a strong hold on glass and nonporous plastic surfaces Rustproof marine grade stainless steel construction Powder Coated Marine Grade Aluminum Spring loaded cradle expands and contracts for perfect fit Rubber coated tips will hold device firm and stable 1in Rubber Ball - inBin Size Socket technology allows for multiple adjustment angles Includes Tether for open cockpit and extreme environments Made in U.S.A. Authorized Internet Dealer Lifetime Manufacturer's WarrantyCradle Dimensions Minimum Width = 1.875in (Minimum Height = 4.25in) Maximum Width = 3.25in (Minimum Height = 2.25in) Depth = 0.875inCompatible Devices Apple iPhone 6 iPhone 5s iPhone 5c iPhone 5 iPhone 4S iPhone 4 iPod touch (All Models) iPod (G1-G5) Check out the RAM X-Grip User Guide




RAM Mounts Universal X-Grip Cell Phone Cradle With Master Cylinder Mount

RAM Mounts Universal X-Grip Cell Phone Cradle With Master Cylinder Mount

$56.99
View Product

Category: automotive > replacement parts > engines & engine parts > engine parts > engine mounts | Brand: RAM Mounts | Merchant: Chaparral Motorsports Consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 1/2'' to 1 1/4'' in diameter; double socket arm and universal X-Grip cell phone cradle. Designed into the mount is a 1'' diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob; allows you to move the X-Grip mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip cradle expands and contracts; allowing for a perfect custom fit of your cell phone. The X-Grip includes a device tether recommended for outdoor applicatioins. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Made from powder coated marine grade aluminum; marine grade stainless steel components and high strength composite Cradle Dimensions Minimum Width = 1 7/8'' (Minimum Height = 4 1/4'') Maximum Width = 3 1/4'' (Minimum Height = 2 1/4'') Depth 7/8'' Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments 1'' Rubber Ball ''B'' Size Weight 1.1 lbs. Lifetime manufacturer's warranty Made in the USA Black Note: To see if this product will mount to your motorcycle; check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94'' and a maximum of 1.58''. RAM highly recommends usin


')