Turner Performance Products Honda CR/CRF Pro-Pack Hardware Kit

Turner Performance Products Honda CR/CRF Pro-Pack Hardware Kit
$49.99

Shop Now

Category: automotive > replacement parts > brake system > disc hardware kits | Brand: Turner Performance Products | Merchant: MotoSport

Turner Performance Products Honda CR/CRF Pro-Pack Hardware Kit
The Honda CR/CRF Pro-Pack Hardware Kit contains over 200 pieces of O.E.M. type hardware in factory style and finish. All Turner Performance Products hardware meets or exceeds O.E.M. quality and specifications.All hardware comes packaged in a reusable and orderly injection-molded case.Kit Contents (based on sort order in container) :Hex flange bolts: (6) M8x40.Hex flange bolts: (4) M8x35, (4) M8x30.Hex flange bolts: (2) M8x25, (2) M8x20, (2) M8x16.Hex flange bolts: (2) M10x24.Honda specialty: (2) M8x19.5, (2) M8x17.5, (2) M8x11.5.Honda specialty: (4) M5x8.7, (6) M6x7.Sprocket bolt sets: (6) M8x32, (6) M8 Fuji, (6) M8x16 washers.Valve stem: (2) caps, (2) grommets, (1) cap screwdriver.Chain adjusters: (2) M8x50 hex bolts, (2) M8 flange nuts.Hex flange bolts: (2) M6x45, (2) M6x40, (3) M6x30.Hex flange bolts: (5) M6x25, (6) M6x14.Hex flange bolts: (8) M6x16, (8) M6x18.Hex bolts and washers: (4) M6x16.Hex large flange bolts: (3) M6x16, (3) M6x12.Hex flange bolts: (4) M6x12.Honda specialty: (6) M6x12.Aluminum bushings: (2) M6x18x7.6, (4) M6x18x5.2.Pan Phillips screws: (8) M5x10.Phillips flush-mount screws: (2) M4x12.Hex flange bolts: (4) M5x12.Compression washers: (2) M6x11, (6) M8x15, (4) M10x15.Cotter pins: (2) 2.0x19, (2) 2.6x25.Flat washers: (2) M8x25, (4) M8x16, (5) M6x25, (4) M6x23, (4) M6x16.Fuji nuts: (2) M6, (2) M8, (2) M10.Flange nuts: (1) M6, (2) M8.T-nuts: (4) M6.Hex bolts: (10) M6x19.Fuji nuts: (10) M6.Note: Please examine contents list to ensure that the kit includes all of the hardware you require.


Similar Products:


Turner Performance Products Hot Start Kit

Turner Performance Products Hot Start Kit

$39.99
View Product

Category: automotive > replacement parts > exhaust & emissions > mufflers | Brand: Turner Performance Products | Merchant: MotoSport 4-stroke billet rotating hot start lever.Add to any OE 4-stroke brake master cylinder perch.Turner quality and fit.




Jet Performance Products Underdrive Pulley Set 90500 Pulley Kit

Jet Performance Products Underdrive Pulley Set 90500 Pulley Kit

$232.99
View Product

Category: automotive > replacement parts > belts hoses & pulleys > pulleys > idler | Brand: Jet Performance Products | Merchant: 4Wheel Drive Hardware Underdrive Pulley Set Fits 1996 to 1997 ZJ Grand Cherokee;5.2L engines;Hardware included JEEP GRAND CHEROKEE GRAND CHEROKEE (ZJ) GRAND WAGONEER BASE LAREDO LIMITED ORVIS SE TSI 1993 1994 1995 1996 1997 5.2L Magnum (318) GAS with Underdriven Jet Performance Products Underdrive Pulley Set 90500 Pulley Kit




Turner Performance Products Steel Sprocket & Chain Kit

Turner Performance Products Steel Sprocket & Chain Kit

$254.97
View Product

Category: automotive > motorcycle & powersports > parts > drive train > chains & sprockets | Brand: Turner Performance Products | Merchant: MotoSport The MotoSport.com Turner Steel Sprocket & Chain Kit includes ONE Steel Countershaft (Front) Sprocket, ONE Steel Rear Sprocket, and your choice of ONE Premium Drive Chain, each with the following features:The Turner Steel Sprocket & Chain Kit is an easy and affordable way to replace or upgrade your O.E.M. sprockets and chains in one easy purchase! Sprockets / Chainwheels Included:Turner Front Steel Sprocket:Made exclusively from the finest high-carbon steel.Outlasts any mild steel or surface-hardened sprocket.Heat treated and hand finished.Turner Rear Steel Sprocket:Made exclusively from the finest high-carbon steel.Outlasts any mild steel or surface-hardened sprocket.Heat treated and hand finished.Your Choice of Drive Chain:ChainChain TypeAvg. Tensile StrengthMaximum Rated DisplacementWeight (pounds per 100 links) Master Link TypeD.I.D 420 Standard ChainNon-sealed (standard) 4,200 poundsN/AN/AClipD.I.D 420 NZ3 ChainNon-sealed (standard) 4,780 poundsN/A1.81ClipRenthal 420 R1 ChainNon-sealed (standard) 4,271 pounds150cc1.76ClipSunstar 420 MXR1 Works MX Racing ChainNon-sealed (standard) 5,000 pounds150cc1.76ClipD.I.D 428 Standard ChainNon-sealed (standard) 4,480 poundsN/AN/AClipD.I.D 428 NZ ChainNon-sealed (standard) 5,740 poundsN/A2.20ClipRenthal 428 R1 ChainNon-sealed (standard) 4,609 pounds230ccN/AClipSunstar 428 MXR1 Works MX Racing ChainNon-sealed (standard) 5,800 pounds150cc2.13ClipD.I.D 520 Standard ChainNon-sealed (standard) 6,700 poundsN/AN/AClipD.I.D 520 DZ2 ChainNon-sealed (standard) 7,870 pounds450cc3.08ClipD.I.D 520 ERT2 ChainNon-sealed (standard) 8,100 pounds450cc2.99ClipD.I.D 520 NZ Heavy Duty ChainNon-sealed (standard) 8,800 pounds250cc3.54ClipD.I.D 520 ATV X-Ring ChainX-ring7,600 pounds750cc3.65ClipD.I.D 520 ERV3 X-Ring ChainX-ring8,650 pounds750cc3.30RivetD.I.D 520 VX2 X-Ring ChainX-ring8,210 pounds750cc3.35ClipRenthal 520 R1 Race ChainNon-sealed (standard) 7,644 pounds450cc2.13ClipRenthal 520 R3 O-Ring ChainO-ring7,644 pounds500cc3.36ClipRenthal 520 R4 ATV Z-Ring ChainZ-ring8,093 poundsN/AN/ARivet and ClipSunstar 520 HDN Heavy Duty Non-Sealed ChainNon-sealed (standard) 7,900 pounds250cc3.15ClipSunstar 520 SSR O-Ring Sealed Ring ChainO-ring7,700 pounds400cc3.35ClipSunstar 520 XTG TripleGuard Sealed ATV & Offroad ChainTG-ring8,500 pounds750cc3.36ClipSunstar 520 MXR1 Works MX Racing ChainNon-sealed (standard) 9,000 pounds500cc2.99ClipNotes on Manufacturer Chain Type:Z-ring - Renthal proprietary and patented X-ring design.TG-ring - Sunstar proprietary X-ring design. TripleGuard sealed ring technology where there are 3 sealing lips and lubrication pools on each side of the ring to maintain top performance in high heat, extreme conditions; the TripleGuard ring type is the best for lubrication and protection.Note for installing X-ring chains: As X-ring chains are wider than standard roller chains, when fitting an X-ring chain to a motorcycle that was fitted with a non O-ring chain as original equipment, it is essential to check that there is proper clearance of the engine cases near the countershaft sprocket and any other places of close contact. Failure to do so could result in damage to the chain and motorcycle and could ultimately cause the chain to fail.Note: Image is for reference ONLY, actual product will vary based on fitment and selection.Some Helpful Tools: Try the Motion Pro Chain Breaker & Riveting Tool or BikeMaster's Heavy-Duty Chain Breaker & Rivet Tool to make removing your old chain and installing your new chain as easy and painless as possible. D.I.D 420 / 428 / 520 Standard Chain:The D.I.D Standard Non-O-Ring Chain is designed for low horsepower, smaller displacement mopeds, scooters and vintage motorcycles.For machines originally equipped with non-O-ring chains.Solid rollers.Shot-peened parts.High cylindrical and roundness accuracy.Exacting tolerances provide low friction.Pre-stretched.Special alloy steel with extended riveted bushing ""anti-kink"" design.Highest quality non-O-ring chain in overall combined performance.Average tensile strength of:420 pitch: 4,200 pounds.428 pitch: 4,480 pounds.520 pitch: 7,200 pounds.Wear life index: 100.Includes clip-style master link.Note: Non-sealed chains require more regular maintenance than sealed (O-ring, X-ring) versions and are mainly recommended for off-road use.Return to ChartD.I.D 420 NZ3 Chain:Pinning your bike out of every turn might tear apart the stock chain, but D.I.D and their 420NZ3 Gold chain will not let you, or your race for first, down.D.I.D's exclusive SDH (Super DH) pin treatment is the secret behind the superior performance of the NZ Series chains. This high-tech pin treatment forms an extremely hard chromium carbide layer on the pin's surface while maintaining a soft inner core. SDH treated pins have extreme impact strength while maintaining outstanding shock absorption. This treatment creates a chain with anti-oxidation properties and superior wear resistance against invasion of hard foreign materials.For machines originally equipped with non-O-ring chains.Solid rollers.Shot-peened parts.High cylindrical and roundness accuracy.Exacting tolerances provide low friction.SDH pin treatment - hard chromium-carbide layer formed on pin surface for exceptional strength and wear resistance.Pre-stretched.Special alloy steel with extended riveted bushing ""anti-kink"" design.Highest quality non-O-ring chain in overall combined performance.Up to 19% higher tensile strength; average tensile strength of 4,780 pounds.Wear life index: 410.Weight (per 100 links) : 1.81 pounds.Includes a clip-style master link.Note: Non-sealed chains require more regular maintenance than sealed (O-ring, X-ring) versions and are mainly recommended for off-road use.Return to Chart D.I.D 428 / 520 NZ Chain:Pinning your bike out of every turn might tear apart the stock chain, but D.I.D and their NZ chain will not let you, or your race for first, down.D.I.D's exclusive SDH (Super DH) pin treatment is the secret behind the superior performance of the NZ Series chains. This high-tech pin treatment forms an extremely hard chromium carbide layer on the pin's surface while maintaining a soft inner core. SDH treated pins have extreme impact strength while maintaining outstanding shock absorption. This treatment creates a chain with anti-oxidation properties and superior wear resistance against invasion of hard foreign materials.For machines originally equipped with non-O-ring chains.Solid rollers.Shot-peened parts.High cylindrical and roundness accuracy.Exacting tolerances provide low friction.SDH pin treatment - hard chromium-carbide layer formed on pin surface for exceptional strength and wear resistance.Pre-stretched.Special alloy steel with extended riveted bushing ""anti-kink"" design.Highest quality non-O-ring chain in overall combined performance.Up to 19% higher tensile strength; average tensile strength of:428 pitch: 5,740 pounds.520 pitch: 8,220 pounds.Wear life index: 410.Weight (per 100 links) :428 pitch: 2.20 pounds.520 pitch: 3.54 pounds.520 pitch is rated for up to a 250cc bike.Includes a clip-style master link.Note: Non-sealed chains require more regular maintenance than sealed (O-ring, X-ring) versions and are mainly recommended for off-road use.Return to ChartD.I.D 520 ATV X-Ring Chain:The D.I.D X-ringA (R) is superior to other types of O-ring designs; it has half the power loss and 1.5 to 2 times the wear resistance of a normal O-ring chain. D.I.D's patented X-ring construction reduces friction by twisting between the side plates instead of being squashed. Normal O-rings and other makers' modified O-rings have squashed points that increase friction. The twisting action of the X-ring disperses the pressure and minimizes power loss. The X-ring's four contact points greatly increase its sealing performance. This keeps the dirt out and the lubrication in much better than any other O-ring. X-rings have the greatest wear resistance of any other type of O-ring or non-O-ring chain.Uses a special steel alloy designed specifically to provide the extra strength required for quad racing.Features the same low friction, long wearing X-ring technology as D.I.D's VX, ZVM-X, ZLV, and ERV chains.The ATV X-ring chain is engineered to create additional pockets to lock in grease to prolong the life of the chain.Solid rollers.Shot-peened parts.High cylindrical and roundness accuracy.Exacting tolerances provide low friction.Pre-stretched.Extended riveted bushing ""Anti-Kink"" design.Average tensile strength of 7,600 pounds.Wear life index: 3250.Rated up to a maximum displacement of 750cc.Weight (per 100 links) : 3.65 pounds.Includes a clip-style master link.Return to ChartD.I.D 520 DZ2 Chain:The All New D.I.D 520DZ2 is the best value in a lightweight, high-performance chain designed for motocross racing.Great value in a lightweight chain.Designed for off-road riding and motocross.The DZ2 has twice the lifespan of the previous DZ.SDH pin treatment - hard chromium-carbide layer formed on pin surface for exceptional strength and wear resistance.Flexible inner soft core absorbs shock.For entry level motocross, trial riding at an affordable price.Average tensile strength of 7,870 pounds.Wear life index: 410.Rated for up to a 450cc motocross bike.Weight (per 100 links) : 3.08 pounds.Includes a clip-style master link.Notes: DZ and DZ2 Connecting Links are not interchangeable. Non-sealed chains require more regular maintenance than sealed (O-ring, X-ring) versions and are mainly recommended for off-road use.Return to ChartD.I.D 520 ERT2 Chain:The D.I.D ERT2 chain is the most trusted chain in Supercross and motocross racing because of its reputation of meeting the high quality demands that are required when pushing the limits. It was designed with the intention of making a chain that is optimized for the purpose of racing. D.I.D beefed up the ERT2 chain by increasing the pin size by 3% to give the chain an average tensile strength of 8,100 pounds. Increasing the strength of the ERT2 chain did not come with a sacrifice of weight, in fact DID was able to shed 5% from the previous ERT chain.Exclusively designed for motorcycle racing.High-performance, lightweight and low friction chain.3% bigger pin diameter and 5% lighter than former ERT.Provides the highest wear resistance, tensile strength and impact resistance.Average tensile strength of 8,100 pounds.Wear life index: 430.Rated for up to a 450cc motocross bike.Weight (per 100 links) : 2.99 pounds.Includes a clip-style master link.Notes: ERT and ERT2 Connecting Links are not interchangeable. Non-sealed chains require more regular maintenance than sealed (O-ring, X-ring) versions and are mainly recommended for off-road use.Return to ChartD.I.D 520 ERV3 X-Ring Chain:The D.I.D ERV3 X-ring chain is the ultimate high-performance, lightweight, low-friction race chain available and is used extensively by many off-road race teams. The ERV3 X-ring chain utilizes D.I.D's patented X-ring technology which reduces friction by 50% over standard O-ring chains for minimized power loss. The pins on the ERV3 X-ring chain have been put through a patented heat-treatment process to produce a pin that is 1.5 times harder than conventional pins. The result is a chain that is significantly stronger and offers better wear resistance than many other chains on the market. D.I.D ERV3 X-ring chains feature a gold-plated finish that resists rust and adds a little style to your motorcycle or ATV.Exclusively designed for motorcycle racing.High performance, lightweight and low friction chain provides the winning edge in World Class competition.Features gold color plates.Average tensile strength of 8,650 pounds.Wear life index: 3100.For 250 - 750cc Rally, 750cc Superbike and 250 - 750cc Endurance applications.Weight (per 100 links) : 3.30 pounds.Includes a rivet-style master link.Return to ChartD.I.D 520 VX2 X-Ring Chain:D.I.D's Pro-Street X-RingA (R) VX Series Chains are high quality X-RingA (R) chains with superior strength to withstand the horsepower of today's dual sports and trials bikes. The VX Series uses D.I.D's patented low friction X-RingA (R) for maximum performance.Greater rigidity (7% higher than previous VM chain) creates smother handling, reduced power loss and quicker response.Highest value in all D.I.D series.D.I.D X-Ring has half the friction and 50 - 100% longer wear life compared to typical O-ring chains.Superior longer life than previous VM series.Solid rollers.Shot-peened parts.Pre-stretched.Extended riveted bushing ""Anti-Kink"" design.Replaces the Professional O-ring V Series and the Premium X-ring VM series chains.Average tensile strength of 8,210 pounds.Wear life index: 3500.Ideal for bikes and ATV's up to 750cc.Weight (per 100 links) : 3.35 pounds.Includes clip-style master link.Return to Chart Renthal 420 / 428 / 520 R1 Chain:Renthal's R1 Works Chain is a high-strength non O-ring chain with excellent impact load resistance designed specifically to withstand the stress found in off-road applications. This chain is the choice where a combination of high strength, light weight and maximum power transfer are important considerations.Shot-peened alloy steel side plates for high tensile strength and maximum impact load resistance.Chamfered inner links to reduce the chance of chain derailment.Extended bushings to reduce friction between outer and inner link plates, maximizing power output.Chromized bearing pins for excellent resistance to wear.Gold color side plates help prevent corrosion.Most perfectly matched chain for Renthal sprockets allowing maximum power at the rear wheel. This also extends the life of both the chain and sprockets.Average tensile strength of:420 pitch: 4,271 pounds.428 pitch: 4,609 pounds.520 pitch: 7,644 pounds.Wear life index: 300.Maximum displacement:420 pitch (street / off-road) : N/A / 150cc.428 pitch (street / off-road) : N/A / 230cc.520 pitch (street / off-road) : N/A / 450cc.Weight (per 100 links) :420 pitch: 1.76 pounds.520 pitch: 2.13 pounds.Each chain includes master link and a pair of latex gloves for mess free installation.Note: Non-sealed chains require more regular maintenance than sealed (O-ring, X-ring) versions and are mainly recommended for off-road use.Return to ChartRenthal 520 R3 O-Ring Chain:Renthal's R3-2 O-ring Chain is a high-strength sealed-ring chain with excellent impact load resistance designed specifically to withstand the stress found in off-road applications where an O-ring chain is desired. This chain is the choice where a combination of high strength, light weight and maximum power transfer are important considerations. The O-rings help extend chain life by retaining the special vacuum-injected grease near the critical pin area. Chain comes pre-stretched to shorten break-in period.Nitrile O-rings extend chain life by retaining special vacuum-injected grease inside the chain joint.Shot-peened alloy steel side plates for high tensile strength and maximum impact load resistance.High-carbon alloy steel bearing pins for excellent resistance to wear.Gold colored side plates help prevent corrosion.Pre-stretched to enhance performance of the chain.Available in 520 pitch only.Average tensile strength of 7,644 pounds.Wear life index: 750.Maximum displacement (street / off-road) : N/A / 500cc.Weight (per 100 links) : 3.36 pounds.Each chain includes a pair of latex gloves for mess free installation.Note: The Renthal R3-2 chain is supplied with both an easy-fit split master link and a superior solid-pin rivet master link which matches the durability of the chain.Return to ChartRenthal 520 R4 ATV Z-Ring Chain:Renthal's R4 ATV Chain is a premium strength Z-ring chain with excellent impact load resistance, designed specifically to withstand the stress found in ATV applications. The R4 chain features a heavier duty construction process and materials than the standard Renthal R3-2 O-ring chain which increases its service life and tensile strength. The patented ""spring effect"" Z-rings guarantee constant lubrication for longer life and pins manufactured from special alloy steel also contribute to better resistance from wear. Thicker side plates and a quad riveting manufacturing process round out the upgrades on this ATV-specific chain.Patented Z-ring seals dramatically increase the life of the chain.Larger diameter pins manufactured from specially enhanced steel improve the resistance to shock loads.A quad riveting process on each pin increases the tensile strength of the chain.Thicker inner and outer plates increase the fatigue life of the chain.Available in 520 pitch only.Average tensile strength of 8,093 pounds.Each chain includes a pair of latex gloves for mess free installation.Note: The Renthal R4 chain is supplied with both an easy-fit split master link and a superior solid-pin rivet master link which matches the durability of the chain.Return to Chart Sunstar 420 / 428 / 520 MXR1 Works MX Racing Chain:Sunstar's MXR1 Works MX / SX / Off-Road race chain (MXR = Motocross Xtreme Racing) is a premium quality, highly durable non-sealed chain specifically designed for Motocross, Supercross and/or off-road racing. Featuring Sunstar's oversized TripleStar treated ultra hard pins and 100% heat treated components, the MXR1 chain is constructed to handle the demands of the highest levels of racing. This is also one of the lightest MX chains on the market thanks to its superlight design - the 520MXR1 120 link version weighs less than 3.6 pounds, yet is super strong with an 8,970-pound tensile strength rating. Its combination of strength, durability and light weight make it the top choice for serious racers.Deep gold side plates and gold inner plates.Super strong and lightweight design for high performance / racing mini off-road and motocross machines.Utilizes TST (TripleStar Treated) ultra-hard pins and 100% heat treated components for high strength and durability.Seamless rollers and bushings help provide the added life and durability.Average tensile strength of:420 pitch: 5,000 pounds.428 pitch: 5,800 pounds.520 pitch: 9,000 pounds.Maximum rated displacement:420 pitch (street / off-road) : 150cc / 150cc.428 pitch (street / off-road) : 250cc / 150cc.520 pitch (street / off-road) : N/A / 500cc.Weight (per 100 links) :420 pitch: 1.76 pounds.428 pitch: 2.13 pounds.520 pitch: 2.99 pounds.Includes clip-style master link.Note: Non-sealed chains require more regular maintenance than sealed (O-ring, X-ring) versions and are mainly recommended for off-road use.Return to ChartSunstar 520 HDN Heavy Duty Non-Sealed Chain:For a quality non-sealed O.E.M. replacement level chain, Sunstar offers the 520HDN (HDN = Heavy Duty Non-sealed) . This cost effective replacement chain offers great performance and durability at a great price point. This chain is recommended for any motorcycle up to 250cc and is available in pre-cut lengths. It uses a clip-type master link and provides great strength with a 7,850-pound rating.Cost effective, high quality, non-sealed chain.Zero compromise in performance and reliability.Great for any off-road / MX motorcycle up to 250cc.Only available in Natural finish.Average tensile strength of 7,900 pounds.Maximum rated displacement: 250cc.Weight (per 100 links) : 3.15 pounds.Includes clip-style master link.Note: Non-sealed chains require more regular maintenance than sealed (O-ring, X-ring) versions and are mainly recommended for off-road use.Return to Chart




Turner Performance Products Honda CR/CRF Track-Pack Hardware Kit

Turner Performance Products Honda CR/CRF Track-Pack Hardware Kit

$14.99
View Product

Category: automotive > replacement parts > brake system > disc hardware kits | Brand: Turner Performance Products | Merchant: MotoSport The Honda CR/CRF Track-Pack Hardware Kit contains 50 pieces of O.E.M. type hardware in factory style and finish. All Turner Performance Products hardware meets or exceeds O.E.M. quality and specifications.All hardware comes packaged in a reusable injection-molded case.Kit Contents:Flange bolts: (6) M6x16, (2) M6x20, (2) M6x25, (2) M6x30, (1) M6x45, (1) M8x20, (1) M8x25, (4) M5x12 shroud, (4) M6x11 fork guard, (2) M8x16 seat, (2) M8x22 seat, (1) M10x24 subframe.Large flange bolts: (2) M6x12, (2) M6x16.Screws: (4) M5x10 pan head.Nuts: (1) M6 Fuji, (1) M8 Fuji, (1) M10 flange, (2) M6 t-nut.Washers: (4) M6x16, (1) M6x22, (1) M6x25, (1) M8x25.Note: Please examine contents list to ensure that the kit includes all of the hardware you require.




MD Building Products 71551 Backer Rod Pro Pack 1/2 Inch By 250 Foot

MD Building Products 71551 Backer Rod Pro Pack 1/2 Inch By 250 Foot

$38.09
View Product

Category: tools & home improvement > hardware > tarps & tie-downs > rope | Brand: MD Building Products | Merchant: HardwareAndTools.com UPC: 043374715514
Caulk backer rods pro pak size in x 1/2 feet x 250 Fills gaps and openings to prevent drafts. Provides a sound surface for caulking projects. ...




Turner Performance Products Yamaha YZ/YZF Pro-Pack Hardware Kit

Turner Performance Products Yamaha YZ/YZF Pro-Pack Hardware Kit

$49.99
View Product

Category: automotive > replacement parts > brake system > disc hardware kits | Brand: Turner Performance Products | Merchant: MotoSport The Yamaha YZ/YZF Pro-Pack Hardware Kit contains over 180 pieces of O.E.M. type hardware in factory style and finish. All Turner Performance Products hardware meets or exceeds O.E.M. quality and specifications.All hardware comes packaged in a reusable and orderly injection-molded case.Kit Contents (based on sort order in container) :Hex flange bolts: (6) M8x40.Hex flange bolts: (6) M8x35.Hex flange bolts: (1) M8x30, (2) M8x25, (3) M8x16.Fuji nuts: (2) M10, (2) M6.Flange nuts: (2) M10, (2) M8.Fork guard bolts: (6) M6x8.Sprocket bolt sets: (6) M8x32, (6) M8 Fuji, (6) M8x16 washers.Valve stem: (2) caps, (2) grommets, (2) rim-lock spacers, (1) cap screwdriver.Chain adjusters: (2) M8x50 hex bolts, (2) M8 flange nuts.Hex flange bolts: (4) M6x40, (6) M6x35.Hex flange bolts: (8) M6x30.Hex flange bolts: (10) M6x25.Hex flange bolts: (4) M6x20, (2) M6x16, (4) M6x14, (2) M6x12.Hex large flange bolts: (4) M6x16, (8) M6x12.Cotter pins: (3) 2.0x19.T-nuts: (2) M6.Flat washers: (2) M6x16, (2) M6x12.Compression washers: (2) M10x18, (4) M10x15, (2) M8x15, (2) M6x12.Flat washers: (1) M8x25, (1) M6x25, (6) M6x23, (4) M8x16.Hex bolts and washers: (6) M6x20.Hex bolts and washers: (4) M6x12.10 mm hex flange bolts: (2) M6x16.Button-head Allen bolts: (2) M6x16.Pan Phillips screws: (4) M5x10.Aluminum bushings: (2) 22x11.2x5, (2) 15x6.3x5.1.Aluminum oval bushings: (4) 25x20x5.1, (4) 22x17x5.2.Hex flange bolts: (6) M6x12 (Nylok) .Countersunk bolts: (6) M6x16.3 (Nylok) .Note: Please examine contents list to ensure that the kit includes all of the hardware you require.




Pro Comp Suspension MX6R Shock Kit 63012 Shock Absorber Reservoir Isolator

Pro Comp Suspension MX6R Shock Kit 63012 Shock Absorber Reservoir Isolator

$9.99
View Product

Category: automotive > performance parts & accessories > shocks struts & suspension > shocks & struts | Brand: Pro Comp Suspension | Merchant: 4Wheel Drive Hardware MX6R Shock Kit Mount shock reservoir to shock body;Urathane mounting blocks included;Stainless steel hardware included Pro Comp Suspension MX6R Shock Kit 63012 Shock Absorber Reservoir Isolator




Pro Comp Suspension Shock Reservoir Mounting Kit 63018 Shock Absorber Reservoir Isolator

Pro Comp Suspension Shock Reservoir Mounting Kit 63018 Shock Absorber Reservoir Isolator

$64.99
View Product

Category: automotive > performance parts & accessories > shocks struts & suspension > shocks & struts | Brand: Pro Comp Suspension | Merchant: 4Wheel Drive Hardware Shock Reservoir Mounting Kit Universal;Billet aluminum;Mounts MX2.75CR to 1.5 inch hoop tube Pro Comp Suspension Shock Reservoir Mounting Kit 63018 Shock Absorber Reservoir Isolator




Jet Performance Products Quadrajet Throttle Shaft Bushing Kit 201102 Carburetor Throttle Shaft Bushing

Jet Performance Products Quadrajet Throttle Shaft Bushing Kit 201102 Carburetor Throttle Shaft Bushing

$99.99
View Product

Category: automotive > motorcycle & powersports > parts > controls > throttles | Brand: Jet Performance Products | Merchant: 4Wheel Drive Hardware Quadrajet Throttle Shaft Bushing Kit Quadrajet; Throttle Shaft Bushing Kit; For Rochester/Holley (R) Quadrajet Carburetors; Incl.16 Bushings/Reamer/4 Screws/Instructions Jet Performance Products Quadrajet Throttle Shaft Bushing Kit 201102 Carburetor Throttle Shaft Bushing




Turner Performance Products Euro Track-Pack Hardware Kit

Turner Performance Products Euro Track-Pack Hardware Kit

$14.99
View Product

Category: automotive > replacement parts > brake system > disc hardware kits | Brand: Turner Performance Products | Merchant: MotoSport The Euro Track-Pack Hardware Kit contains over 50 pieces of O.E.M. type hardware in factory style and finish. All Turner Performance Products hardware meets or exceeds O.E.M. quality and specifications.All hardware comes packaged in a reusable injection-molded case.Kit Contents:Hex flange bolts: (2) M6x12, (4) M6x16, (4) M6x20, (4) M6x25, (2) M6x30, (1) M6x40, (1) M6x45, (1) M6x50, (1) M6x55, (2) M8x25, (2) M8x30.Large flange bolts: (2) M5x16, (2) M5x20, (2) M6x12, (4) M6x20.Specialty: (4) M5x12 shroud bolts, (4) shroud screws / ejot, (4) fork guard bolts, (2) M6 convex washers, (2) brake cotter pins, (1) M8 subframe bolt.Note: Please examine contents list to ensure that the kit includes all of the hardware you require.




Turner Performance Products Japanese Track-Pack Hardware Kit

Turner Performance Products Japanese Track-Pack Hardware Kit

$14.99
View Product

Category: automotive > replacement parts > brake system > disc hardware kits | Brand: Turner Performance Products | Merchant: MotoSport The Japanese Track-Pack Hardware Kit contains over 50 pieces of O.E.M. type hardware in factory style and finish. All Turner Performance Products hardware meets or exceeds O.E.M. quality and specifications.All hardware comes packaged in a reusable injection-molded case.Kit Contents:Hex flange bolts: (2) M5x12, (4) M6x12, (6) M6x16, (4) M6x20, (4) M6x25, (2) M6x30, (1) M6x40, (1) M6x45, (2) M8x16, (2) M8x20, (2) M8x30, (2) M8x40.Nuts: (1) M6 flange, (1) M6 Fuji, (1) M8 Fuji, (1) M10 Fuji.Washers: (2) M6x12 flat, (6) M6x16 fender, (4) M6x22 fender, (2) M8x17 flat.Screws: (2) M5x10 pan head.Note: Please examine contents list to ensure that the kit includes all of the hardware you require.




Bolt Hardware Honda CR/CRF Pro-Pack

Bolt Hardware Honda CR/CRF Pro-Pack

$53.99
View Product

Category: automotive > motorcycle & powersports > accessories > handlebar accessories | Brand: Bolt Motorcycle Hardware | Merchant: Chaparral Motorsports Over 210 pieces of Honda factory style hardware Includes; rotor bolts; shroud bolts; t-nuts; seat bolts; sub-frame bolts; aluminum and copper drain plug washers and more Designed for full size Honda CRF models Meets or exceeds O.E.M specs Proudly produced in the USA




LaMotte ColorQ Pro 7 TesTabs Pool Water Test Kit Testing Tablets and Test Tubes Refill Pack

LaMotte ColorQ Pro 7 TesTabs Pool Water Test Kit Testing Tablets and Test Tubes Refill Pack

$64.91
View Product

Category: industrial & scientific > lab & scientific products > lab chemicals | Brand: LaMotte | Merchant: Walmart US ColorQ Pro 7 TesTabs testing tablets and test tube refill pack. Tablets included test for: Free Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Calcium Hardness, and Cyanuric Acid. Quantity: 100 tabs each, per test factor and six 5 mL test tubes. Replacement testing tablets and test tubes for the ColorQ Pro 7 TesTabs Test KitTests Free Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Calcium Hardness, and Cyanuric AcidIncludes 100 tablets each, per test factorIncludes six 5 mL test tubesFor use with LaMotte 2057 ColorQ Pro 7 TesTabs test kit




Turner Performance Products Euro Pro-Pack Hardware Kit

Turner Performance Products Euro Pro-Pack Hardware Kit

$49.99
View Product

Category: automotive > replacement parts > brake system > disc hardware kits | Brand: Turner Performance Products | Merchant: MotoSport The Euro Pro-Pack Hardware Kit contains over 170 pieces of O.E.M. type hardware in factory style and finish. All Turner Performance Products hardware meets or exceeds O.E.M. quality and specifications.All hardware comes packaged in a reusable and orderly injection-molded case.Kit Contents (based on sort order in container) :Torx hex flange bolts: (6) M8x30.Torx hex flange bolts: (6) M8x25.Countersunk bolts: (2) M8x22.Torx hex flange bolts: (2) M6x55, (2) M6x50.Torx hex flange bolts: (2) M6x45, (4) M6x40.Torx hex flange bolts: (6) M6x30.Sprocket bolt sets: (6) M8x32, (6) M8 Fuji, (6) M8x16 washers.Valve stem: (2) caps, (2) rim-lock spacers, (2) grommets, (1) cap screwdriver.Torx hex flange bolts: (8) M6x25.Torx hex flange bolts: (8) M6x20.Torx hex flange bolts: (4) M6x16, (4) M6x12.Torx hex large flange bolts: (6) M6x20, (4) M6x12.Torx hex flange bolts: (2) M5x20, (6) M5x16.Fuji nuts: (2) M6.Flange nuts: (2) M8.Pan Phillips screws: (4) M5x10.R-clips: (6) A1.2x21.Cotter pins: (2) A2.6x25.Convex washers: (2) M6x25x6, (2) M6x22x6.Flat washers: (4) M6x20.Compression washers: (3) M6x12, (4) M10x15, (4) M12x20.Hex flange bolts (specialty) : (6) M6x20.Hex flange bolts: (6) M5x12.Self-tapping screws: (8) M6x20.Aluminum bushings: (2) A28, (2) A27.5, (2) A19.8, (2) A16.Hex flange bolts: (12) M6x13 (Nylok) .Note: Please examine contents list to ensure that the kit includes all of the hardware you require.


')